地表参数对面源大气预测结果的影响性分析研究

为了研究地表参数取值对AERMOD中面源模拟预测浓度值的影响,文章通过改变粗糙度、反照率和波文比的取值来进行不同地表参数与预测结果的相关性分析,同时采用正交试验法来研究不同地表参数对预测结果的敏感性.相关性分析表明,不同地表参数和预测结果有着很高的相关性.敏感性分析表明,反照率数值变化对小时最大落地浓度的敏感性最大,粗糙度数值变化对日均和年均最大落地浓度的敏感性最大.通过研究可以看出在面源大气预测过程中合理选择地表参数值是准确预测的前提.     

低中放处置场环境评价参数灵敏度分析

选取90Sr、239Pu和14C为代表核素,采用单参数变分法对某低中水平放射性固体废物处置场环境影响评价中与核素迁移相关的主要评价参数开展了参数灵敏度分析.分析结果表明:对于低中放处置场而言,环境影响评价模式中主要评价参数的选择对最终评价结果的影响很大,因此在环境影响评价中开展不确定度及敏感度分析是必要的.     

污泥生物炭制备吸附陶粒

以城市污泥热解产生的生物炭(BC)与高岭土(KL)为原料制备吸附陶粒(SKC),研究其对环丙沙星(CIP)的吸脱附性能,开展吸附动力学和等温吸附特性研究,结合形貌、孔结构、物相组成、表面电位探讨其吸附机制,利用TCLP法研究重金属浸出特征.结果表明BC与KL以6∶4的质量比混合造粒,经1 050℃烧结5 min得到的SKC对CIP有明显的吸附效果,去除率达65.34%;SKC对CIP的吸附符合二级动力学模型,在不同质量浓度下的吸附特性适用于Freundlich等温吸附模型,吸附过程同时存在物理和化学吸附.SKC具有良好的孔隙结构,物相组成以硅铝氧化物、铁氧化物和金属磷酸盐为主,既能降低重金属的浸出毒性又具有良好的CIP吸附去除效果,有望为处理废水中高浓度CIP提供一种低成本可回收的吸附材料,也为BC的规模化安全利用提供了新思路.     

磷酸根和镉离子在羟基铁改性膨润土表面的协同吸附机制研究

聚合羟基金属-粘土矿物复合物广泛存在于自然环境中,对重金属阳离子和含氧酸根阴离子均有很好的吸附能力,因此对这些化合物的环境迁移过程及污染控制具有重要影响.研究采用FeCl₃和Na₂CO₃共同改性膨润土,制备了羟基铁－膨润土复合物（HyFe-Bent）.XRD和孔结构分析结果发现,HyFe-Bent的d₀₀₁由原土的1.52 nm增加到1.81 nm,比表面积由原土的52.2 m²·g^-1增大到108.4 m²·g^-1.将HyFe-Bent用于同时吸附水中磷酸根（P）和镉离子（Cd）,结果表明,在实验条件下P和Cd在HyFe-Bent上表现出明显的协同吸附效应,溶液pH升高可促进Cd的吸附但降低P的吸附.此外研究了P和Cd吸附次序对它们吸附性能的影响：在先吸附P的体系中两种物质的吸附性能与同时吸附体系相当,而在先吸附Cd的体系中吸附性能则明显低于同时吸附体系.由此提出P和Cd协同吸附的原理是多种吸附机制共存：除了配体交换和离子交换作用,它们在HyFe-Bent表面还发生了表面沉淀作用,可能形成了Fe-P-Cd三元络合产物.论文研究结果可为了解重金属和含氧酸根复合体系的环境行为及污染控制提供新信息.     

Sulfur-containing amino acid methionine as the precursor of volatile organic sulfur compounds in algea-induced black bloom

After the application of methionine, a progressive and significant increase occurred in five volatile organic sulfur compounds (VOSCs): methanethiol (MeSH), dimethyl sulfide (DMS), dimethyl disulfide (DMDS), dimethyl trisulfide (DMTS) and dimethyl tetrasulfide (DMTeS). Even in the untreated control without a methionine addition, methionine and its catabolites (VOSCs, mainly DMDS) were found in considerable amounts that were high enough to account for the water’s offensive odor. However, blackening only occurred in two methionine-amended treatments. The VOSCs production was observed to precede black color development, and the reaching of a peak value for total VOSCs was often followed by water blackening. The presence of glucose stimulated the degradation of methionine while postponing the occurrence of the black color and inhibiting the production of VOSCs. In addition, DMDS was found to be the most abundant species produced after the addition of methionine alone, and DMTeS appeared to be the most important compound produced after the addition of methionine+glucose. These results suggest that methionine acted as an important precursor of the VOSCs in lakes suffering from algea-induced black bloom. The existence of glucose may change the transformation pathway of methionine into VOSCs to form larger molecular weight compounds, such as DMTS and DMTeS.     

Pb(II) removal from water using Fe-coated bamboo charcoal with the assistance of microwaves

Bamboo charcoal(BC) was used as starting material to prepare iron-modified bamboo charcoal(Fe-MBC) by its impregnation in FeCl 3 and HNO 3 solutions simultaneously,followed by microwave heating.The material can be used as an adsorbent for Pb(Ⅱ) contaminants removal in water.The composites were prepared with Fe molar concentration of 0.5,1.0 and 2.0 mol/L and characterized by means of N 2 adsorption-desorption isotherms,X-ray diffraction spectroscopy(XRD),scanning electron microscopy coupled with energy dispersive X-ray spectrometry(SEM-EDS),Fourier transform infrared(FT-IR) and point of zero charge(pH pzc) measurements.Nitrogen adsorption analyses showed that the BET specific surface area and total pore volume increased with iron impregnation.The adsorbent with Fe molar concentration of 2 mol/L(2Fe-MBC) exhibited the highest surface area and produced the best pore structure.The Pb(Ⅱ) adsorption process of 2Fe-MBC and BC were evaluated in batch experiments and 2Fe-MBC showed an excellent adsorption capability for removal Pb(Ⅱ).The adsorption of Pb(Ⅱ) strongly depended on solution pH,with maximum values at pH 5.0.The ionic strength had a significant effect on the adsorption at pH < 6.0.The adsorption isotherms followed the Langmuir isotherm model well,and the maximum adsorption capacity for Pb(Ⅱ) was 200.38 mg/g for 2Fe-MBC.The adsorption processes were well fitted by a pseudo second-order kinetic model.Thermodynamic parameters showed that the adsorption of Pb(Ⅱ) onto Fe-MBC was feasible,spontaneous,and exothermic under the studied conditions,and the ion exchange mechanism played an significant role.These results have important implications for the design of low-cost and effective adsorbents in the removal of Pb(Ⅱ) from wastewater.     

化工业清洁生产技术措施分析

化工业是导致环境污染的主要产业.当前,我国的化工产业所采用的生产方式仍然是传统的粗放式生产,给我国的生态环境带来了很大的压力.在这种情况下,除了转变生产方式之外,最有效的方法就是采用清洁生产技术.文章通过在化工业生产中使用清洁原料、使用清洁化学反应、使用清洁反应介质、使用清洁水处理技术等多个方面,对化工业清洁生产技术进行了系统性的分析,为广大化工业研究、生产人员提供了参考.     

适应性环境管理模式在大型赛事筹备中的应用（上）——管理模式构建

针对我国环境保护行政管理存在的直线式管理、缺乏弹性等问题,将适应性管理的理论和方法引入环境管理领域,提出适应性环境管理的概念和管理模式,通过构建基于AHP（层次分析法）的适应性环境管理绩效评估体系,在环境管理中对各项任务进行跟踪管理和绩效评估,反馈于阶段性目标的制定,从而灵活调整工作方案,最大限度地降低环境管理中的不确定性,保证环境管理总目标的达成.     

PHAST软件对孔洞泄漏扩散危险区域的分析

运用PHAST软件研究泄漏孔径、风速、泄漏时间和大气稳定度对泄漏扩散面积的影响。结果表明:扩散面积随着泄漏孔径的增大、风速的增大及泄漏时间的增长而增加;大气越稳定,泄漏扩散面积越大。     

基于鲁棒控制的海上井控协调安全技术

应用鲁棒控制方法,建立海洋石油作业系统安全鲁棒控制与协调定量研究模型。根据李亚普诺夫稳定性理论和鲁棒H∞控制法,确定海洋石油作业安全鲁棒性的稳定条件及海上井控管理的安全鲁棒控制协调的设计策略,通过仿真进行验证,为海洋石油作业系统安全鲁棒控制与协调提供定量研究思路。